DIGITAL TEMPERATURE INDICATOR

These are generally used as headers of shell and tube heat exchangers and columns.
This instrument is mainly used to monitor the temperature of liquid in a glass vessel in a typical glass distillation unit.

The instrument consists of a Temperature indicator and a Resistance Temperature Detectors (RTD). The instrument works on 230V, 50Hz power supply. This displays the temperature in degree Centigrades in three and half digits of 12.5mm character height.

 

Cat. Ref.
Vessel size
RTD Length
 DTI20
20
400
 DTI50
50
500
 DTI100
100
600
 DTI200
200
700

 

 
TWO POINT DIGITAL TEMPERATURE INDICATOR

This instrument is mainly used to monitor the temperature of liquid in a glass vessel and temperature of vapours at reflux divider in a typical Glass Distillation Unit. The instrument consists of a Temperature indicator and two Resistance Temperature Detectors (RTDs). The instrument works on 230V, 50Hz power supply. This displays the the temperature in degree Centigrades in three and half digits of 12.5mm character height. A switch is provided to see the two temperatures alternatively.

 

Cat. Ref. Length
Vessel size
RTD Length for vessel
RTD Length for reflux divider
 DTI20
20
400
200
 DTT50
50
500
225
 DTT100
100
600
250
 DTT200
200
700
300

 

 
ELECTRO-MAGNETS

Electro-magnets are used to operate Magnetically operated Reflux dividers. When 'On' the magnet attracts the swinging funnel of the reflux divider so that distillate can be taken off. Electro-magnets are to be mounted outside the glass column, just near to the reflux divider, with the help of adjustable fittings. These are designed to use with Timers to maintain correct ratio between 'Off' and 'On' timings of its activation. Electro-magnets work on 220V DC power supply, for which a output socket is provided in the Timers.

 

Cat. Ref.
Type
 RPM*
Non-flameproof
 RPF
Flameproof

 

 
TIMERS

Timers are designed to use with Electro-magnets to provide a correct ratio of reflux and distillate when operating a Magnetically operated reflux divider.
Timers work on a power supply of 230V, 50Hz.

 

Cat. Ref.
Type
 RPM*
Non-flameproof 
 RPF
Flameproof

 

 
CONTINOUS TEMPERATURE CONTROLLER

This instrument displays and controls the temperature continously by switching the power supply on and off in an electrical heating equipment as per the initial settings of heating temperature, band width and resettemperature.

The instrument consists of a Temperature controller, a series magnetic controller & a Resistance Temperature Detector(RTD).RTD is put into theThermometer Pocket of the glass vessel and desired settings are done. As the temperature in the vessel reaches to the set heating temperature, the temperature controller cuts the power in heating equipment off. Power starts on again as the temperature goes down as per the settings of band width and reset temperatur.
This instrument works on power supply of 230V 50Hz and can be used with heating mantles and heating baths of all the size. It displays the temperature in degree centigrades in three and half digits of 12.5mm character height.

 

Cat. Ref.
Vessel size
RTD Length
 CTC20
20
400
 CTC50
50
500
 CTC100
100
600
 CTC200
200
700