Packing supports Type A are made of fused glass rods. Packing supports Type B (heavy duty) are made of glass plates vertically arranged and tied with PTFE tie rods
| Cat. Ref. | DN | L | Cross Section Area | Max. Load Kgs. | Minimum Packing Size | Type |
| CP3* | 80 | 10 | 45% | 10 | 12 | A |
| CP4* | 100 | 12 | 50% | 15 | 15 | A |
| CP6* | 150 | 55% | 30 | 25 | A | |
| CP9* | 225 | 19 | 60% | 50 | 25 | A |
| CP12* | 300 | 19 | 65% | 75 | 25 | A |
| HD16 | 400 | 70 | 70% | 150 | 25 | B |
| HD18 | 450 | 70 | 70% | 200 | 25 | B |
| HD24 | 600 | 95 | 70% | 300 | 40 | B |
PTFE PERFORATED PLATES
These are used as packing retainers to prevent the packing from lifting due to vapour velocity. These can be clamped between two components without using any gasket.
| Cat. Ref. | DN | d | L |
| TCP3 | 80 | 99 | 7 |
| TCP4 | 100 | 132 | 9 |
| TCP6 | 150 | 184 | 10 |
| TCP9 | 225 | 254 | 12 |
| TCP12 | 300 | 340 | 16 |
SUPPORT PLATE ASSEMBLY
Support plate assembly can be coupled with a pipe section (PS) , so as to use the pipe section as a column section and to fill packings into it. This system provides following advantages over the conventional system of using column section with a packing support.
1. Higher cross section area.
2.More packing height.
3.No separate inventory of column sections.
4.Delivery period of pipe section are shorter.
This assembly consist of a glass support plate, a metal flange, a PTFE ‘O’ ring and nut-bolts.
| Cat. Ref. | DN | L | CrossSection Area | Max. Load Kgs. | Suitable Packing Size |
| LBE3* | 80 | 25 | 70% | 20 | 12 |
| LBE4* | 100 | 25 | 70% | 30 | 15 |
| LBE6* | 150 | 50 | 70% | 60 | 25 |
| LBE9* | 225 | 50 | 80% | 90 | 25 |
| LBE12* | 300 | 50 | 80% | 150 | 25 |
* marked items are available fast.
